Tevo Tornado

For New and Experienced Owners

User Tools

Site Tools


printing_surfaces

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
printing_surfaces [2017/12/10 19:24]
67.163.127.114
printing_surfaces [2018/01/02 17:45] (current)
admin [Glass]
Line 13: Line 13:
   ====== Glass ======   ====== Glass ======
 If you carefully remove the factory supplied print surface, you will find black glass underneath. This glass makes a good printing surface. You can cover it in blue painter'​s tape or just use a glue stick. I have found the Elmer'​s school glue stick works best, it makes removal of the part easy and can be cleaned off with Goo Gone. - If you are outside the USA, you may find different but similar products to do the same thing. If you carefully remove the factory supplied print surface, you will find black glass underneath. This glass makes a good printing surface. You can cover it in blue painter'​s tape or just use a glue stick. I have found the Elmer'​s school glue stick works best, it makes removal of the part easy and can be cleaned off with Goo Gone. - If you are outside the USA, you may find different but similar products to do the same thing.
 +
 +Many people have purchased mirror tiles from their local hardware store and had good results printing on that surface. It may provide a good alternative to printing directly on the black glass. Bear in mind that everything you add to your bed will add weight. You may want to ensure that your acceleration and jerk settings are not too high.
printing_surfaces.txt ยท Last modified: 2018/01/02 17:45 by admin