Tevo Tornado

For New and Experienced Owners

User Tools

Site Tools


bed_leveling

Bed Leveling

To manually level the bed you can use a piece of paper and rest it between the nozzle and the print surface. The Z axis should be in the home position. Slide the paper between the nozzle and print surface, if it is loose adjust the bed leveling knob that is closest to the nozzle until you feel the paper being gripped slightly. Repeat this for all four corners. You may need to repeat this as adjusting one knob may interfere with the level from another.

Auto Bed Leveling

There are several ways of automatically leveling the bed. These are slightly more complicated to implement. You will need to update the firmware for them to work. See the Auto Bed Leveling page for more information.

bed_leveling.txt · Last modified: 2017/12/13 23:32 by admin

Except where otherwise noted, content on this wiki is licensed under the following license: Public Domain
Public Domain Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki